Rust Proofing

The choice for new cars/4x4s that see regular road use - Nilrust Bottomside is a highly advanced chemical compound, which is applied to the underbody of a vehicles. It penetrates “hard-to-reach” seams and joints to prevent corrosion. The flexible protective coating also seals out air and moisture and other corrosion forming compounds. It STOPS rust from forming on vulnerable areas, including the chassis and vital safety components.

‍

Package Inclusions:

• High pressure underbody pre-rinse (Removing any loose dirt/debris before hand washing)
  

• pH neutral degreasing foam wash and secondary rinse (To loosen built up dirt on vehicles surface and avoid damaging the paint, rubber and plastic surfaces when hand washed)
  

• 3 Bucket hand wash (Carried out with correct washing techniques to prevent damaging delicate electronics, rubber lines and hoses)
  

• Light brushing of painted surfaces (Carefully removes particles, tar & road debris from the underbody surfaces without damaging the chassis)
  

• Wire brush and Acid Etching Formula (To neutralize any existing rust on raw metal components)
  

• Application of Nilrust Bottomside or Nilrust Clear Coat to all underbody surfaces

(Excluding exhaust and mechanical components)

2 days required

Commercial Vehicles P.O.A - The choice for new cars/4x4s that see off road use, beach trips and boat launch/retrieval on a daily basis - Nilrust Bottomside or Nilrust Clear Coat are highly advanced chemical compounds, which is applied to the underbody of a vehicles. It penetrates “hard-to-reach” seams and joints to prevent corrosion. The flexible protective coating also seals out air and moisture and other corrosion forming compounds. It STOPS rust from forming on vulnerable areas, including the chassis and vital safety components.

‍

Package Inclusions:

• High pressure underbody pre-rinse (Removing any loose dirt/debris before hand washing)
  

• pH neutral degreasing foam wash and secondary rinse (To loosen built up dirt on vehicles surface and avoid damaging the paint, rubber and plastic surfaces when hand washed)
  

• 3 Bucket hand wash (Carried out with correct washing techniques to prevent damaging delicate electronics, rubber lines and hoses)
  

• Light brushing of painted surfaces (Carefully removes particles, tar & road debris from the underbody surfaces without damaging the chassis)
  

• Wire brush and Acid Etching Formula (To neutralize any existing rust on raw metal components)
  

• Application of Nilrust Bottomside or Nilrust Clear Coat to all underbody surfaces (Excluding exhaust and mechanical components)
  

• Application of Nilrust bottomside or Nilrust Clear Coat is double layered (Total of 12-14 litres compared to the usual 6 litres - ensures maximum chemical protection for vehicles that are exposed to the elements on a daily basis)

2 days required

The NECCS (Nilrust Electronic Corrosion Control System) is a fully computerised device designed to prevent corrosion in vehicles. It does this by a process called capacitive coupling. Both a negative and electrostatic field are induced through the vehicle reducing the rate at which oxygen and the body steel combine. Corrosion is then reduced or stopped. Virtually indestructible, being water and dust proof. Does not interfere with the vehicle’s electronic systems and draws less than 30 milliamps. When a NECCS gives a green light, it’s a 100% guarantee the system is performing second to none. Covered by a 10 year warranty. NECCS are manufactured in Australia for Nilrust by the market leader in this industry.

Package Inclusions:

• Electronic Rust Proofing 1 pad - Nilrust Standard unit is suitable for small/medium sized road cars.
  

• Electronic Rust Proofing 2 pad – Nilrust Standard 4×4 Unit Nilrust 4×4 Standard unit is suitable for small 4×4′s, utes and vans.
  

• Electronic Rust Proofing 4 pad – Heavy Duty 4×4 Unit – 4 Nilrust Standard 4×4 Heavy Duty unit is suitable for industry vehicles 4×4′s, utes and vans.
  

• Installation of chosen Nilrust Electronic Corrosion Control System

1 day required

‍